
ZS VARIO 3.5 MSP
VARIO | Two Post Inground Lift with swing arm support
VP 252120
Description |
Description:
Modular driving platforms:- Driving platform length 4400 mm, 105 mm tall, ideal for cars
- The ideal lifting platform for any service consultation area
- Attractive driving platform inserts, optionally made of:
- Durable Bangkirai hardwood from sustainable forestry
- Galvanised steel grille
- Sheet steel with high-quality powder coating
- Sheet steel with anti-slip granulate coating
- Sheet steel with elegant aluminium panelling
- Ample freedom of movement in the working area below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle in particular
- Flexible lift with maximum application range thanks to
- Fast hoisting of the vehicle with the main platforms in the service consultation area or for chassis alignment checks
- also for repair or for inspection work
- wheel-free lifting by means of swing arm support standard up to 600 mm lifting distance or optionally with full extension up to 2000 mm
- Wheel-free lifting with swing arm support for lifting at the sill support points or frame support points
- Accurate take-up of vehicles thanks to standard height-adjustable turning plates with thread and plug-in system
- Support raisers and form-locking vehicle mounts for secure vehicle fixing in the product range
- Swing arm support with continuously telescoping 3-part support arms for large and flexible support area
- Automatic support-arm restraint can be reached particularly easily from above for manual readjustment of the support arms in raised set-up condition
- Very flat swing arm support with low minimum pad heights of 73 / 58 / 65 / 84 mm for very flat vehicles
- Various assembly variants for optimum use with
- driving platform resting on floor with low drive-on height and platform movement area with no tripping hazard edges
- driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area
- Optional no-dazzle rotatable LED lighting
- Pinch point and shear point protection thanks to CE stop
- A corrosion-resistant, hard-chrome plated hydraulic piston ensures long-term stability since this is immersed in hydraulic oil with every lift, thus ensuring the application of a latent protective film.
- Simple, suspended installation of the lifting platform - offering the advantage of power transmission directly into the hall floor
- Ultra-quiet hydraulic pump and electric motor, corrosion-resistant oil-submerged version, optionally available with organic oil
- Electronic lift control with visual error display
- Battery-operated emergency lowering
- Optimisation of every aspect of workplace ergonomics thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system
Standard Delivery:
- Modular driving platform 4400 mm powder coated anthracite (RAL 7016) with selected driving platform surface
- Wheel-free jack swing arm support (SP) with swing arm holder and swing arm extensions galvanised
- Support disc and support raiser 50 mm
- Wheel nut tray, magnetic (2 pcs.)
- Lift unit with integrated after-lift device
- Ramps (2x2 pcs.)
- Wiring and mounting material
- Installation box/installation frame not included in delivery
- Emergency DOWN cable for connection to switch box
- Control unit with 4 x 10 m control cables (flexible oil cables)
- Lockable master switch
- Operating manual and test log
- EC Declaration of Conformity CE
Documents |
Technical data |
Load capacity CE | 3500 kg |
Load capacity CE with wheel-free jack | 3200 kg |
Lifting height max. | 1974 mm |
Full travel of wheel-free jack | 600 mm |
Post diameter | 125 mm/90 mm |
Raising / Lowering time (load-dependent) approx. | 35 s / 35 s |
Lifting/lowering time of wheel-free jack depending on load approx. | 11 s / 11 s |
Installation depth | 2380 mm |
Inner drive-through width | 900 mm |
Piston centers | 1350 mm |
Swing arm pivot point spacing | 2500 mm |
Swing arm extension | 530 mm - 1020 mm |
Disc adjustment range | 73 mm - 97 mm |
Disk adapter extenders | 50 mm |
Total width | 0 mm |
Drive-through width | 2262 mm |
Operating pressure | 28 bar |
Motor power | 3 kW |
Fuse gG | 16 A |
Power supply | 3/N/PE 400 V 50 Hz |
Control unit (H x W x D) | 400 mm x 280 mm x 120 mm |
Dimensions total (L x W x H) | 5190 mm x 2710 mm x 231 mm |
Runway dimensions (L x W x H) | 4400 mm x 630 mm x 105 mm |
Hydraulic fluid quantity (not included in standard delivery) | 108 l |
Images |
Request for quotation - ZS VARIO 3.5 MSP