
MET 6.2 Diesel Tester
MET-SERIES | Emission Tester for Diesel
VP 135036
Description |
Description:
- Emission tester stands out due to limited weight and compact design
- Short warm-up time, quick measurement readiness
- Time-saving and easy testing/diagnosis of opacity/particle concentration using the partial flow method with free acceleration or engine under load
- Intuitive operation, clear structure in emissions testing process as set out in current guidelines 5 enable minimum cycle times
- Varied and simple network connection options LAN / WLAN (optional)
- The MAHA VCI makes EOBD analysis easy
- Official German PTB-approval 18.09
- Instantaneous or continuous measurement
- Innovative method for separation of condensed water thanks to active water separator
- Options:
- W-LAN interface
Standard Delivery:
- Basic device (opacimeter) opacity measurement device/particle concentration measurement device in high-quality synthetic casing with integrated display unit and keypad
- Steel mesh emission probe, 600 mm, 2000 mm probe tubing
- LAN interface with LAN cable
- Power supply unit 110V
- 230V, 50/60Hz
- Main filter, zero filter and condensate filter
- Transparent drain hose for condensed water with collecting tank
- 2 replacement filters, 2 replacement seals
- Measurement software for continuous measurement without country-specific test procedure
Documents |
Technical data |
Measurement principle | Extinktionsmessung |
Warm-up time of the measurement chamber approx. | 150 s |
On-board voltage | 10 V / 30 V |
Power supply | 1/N/PE 110 V/230 V 50 Hz/60 Hz |
Dimensions total (L x W x H) | 406 mm x 225 mm x 160 mm |
Weight | 4,6 kg |
Measuring range particle concentration | 1 - 1100 mg/m³ |
Resolution of particle concentration | 1 mg/m³ |
Measurement range turbidity | 0 - 100 % |
Measuring range absorption coefficient | 0 - 9,99 m-1 |
Resolution absorption coefficient | 0,01 m-1 |
Images |
Request for quotation - MET 6.2 Diesel Tester